AMDIE – Investment support schemes
Four investment charter mechanisms; main scheme support up to 30% of eligible investment
Official evidence · checked 10 November 2026
This register identifies the official or independently published evidence behind our country, trade and regional data. All business-case proposals require a fresh transaction-specific check before any investment decision.
Four investment charter mechanisms; main scheme support up to 30% of eligible investment
Main support eligibility criteria, qualifying jobs, CAPEX and premiums
2025 installed renewable capacity share and national 2030 objective
Drarga location, current phase area 64 ha and wider 305-ha programme; land availability is not guaranteed
Regional ecosystems, industrial zones and established sector areas
Independent assessment of business environment, regional development and FDI constraints
Electricity self-generation law 82-21 and regulatory framework
Productivity, skills and water stress; challenges beyond headline investment incentives
Installed electricity capacity, 46.1% renewable share of installed capacity in 2025
Published indicative land pricing by industrial zone and regional workforce / training indicators; reconfirm current terms
17.92 MAD per hour for non-agricultural work from 1 January 2026; 97.44 MAD per day for agricultural work from 1 April 2026
Regional cultivated area, 1.2 million tonnes of early-crop exports and existing conditioning units; water constraints
Solar irradiation and PV yield data are available for site-specific production modelling; no project savings are guaranteed
Dutch government agricultural report on protected cropping, export production, Dutch investment examples and water pressures
Describes regional port, road, airport and industrial logistics infrastructure; does not guarantee route frequency
Overview of the regional fisheries cluster and Haliopolis industrial development; some published figures are historical
Regional eligibility descriptions: Agadir Ida-Outanane excluded from territorial premiums; Inezgane/Aït Melloul and other qualifying provinces may differ
2025 goods trade (€62.2bn), trade arrangement, preferential-origin framework
Carbon Border Adjustment Mechanism active from 1 January 2026 and importer requirements
EU–Morocco Protocol 4, PEM origin rules and transitional arrangements; verify the applicable 2026 rules
October 2025 Association Council decision on Protocol 4, published January 2026
Explains the 2026 threshold and exceptions for electricity and hydrogen
Water stress, efficiency, non-conventional resources and national investment response (2023)
Chtouka seawater desalination programme: planning capacity and regional rationale, not plant capacity for private firms
Regional agriculture, irrigation and agri-processing activity
Authorisation of seed and plant businesses, official varietal listing and specified requirements for trials
Harmonised EU maximum residue levels for food, including non-EU agricultural imports
Private farm assurance standard covering water management, IPM, traceability and food safety
Moroccan Law 28-07: food establishments require applicable ONSSA sanitary authorisation and/or approval, with technical and administrative files
Regional investment-centre project examples include IQF vegetables, citrus processing, drying, dates and packaging equipment; they are proposals, not promised orders
Government agency overview of regional crops, processing potential and agricultural services
EU controls for imported food, including hygiene, traceability and product-specific border requirements
EU hygiene law and HACCP-based controls for processors and food businesses
Official list of registered agricultural geographical indications, including protected Argane designation
EU framework and manufacturing rules for packaging and machinery surfaces that contact food
Regional processing sector and agropole description; figures may refer to earlier reporting periods
EU organic imports require an electronic Certificate of Inspection (e-COI) through TRACES
EU consumer food labelling: ingredient, allergen, quantity, date and other product-specific information
Moroccan sanitary control and export certification framework for food, plant and animal products
Laws 13-09, 40-19, 82-21 and implementing decree on self-generation, including the March 2026 procedures
National transmission and distribution hosting-capacity publication; each connection remains subject to technical assessment
IEC 62548-1:2023+AMD1:2025 addresses DC array wiring, switching, earthing and electrical protection
IEC 61724-1:2021 defines photovoltaic performance monitoring principles and data requirements
Souss-Massa industrial sectors, including electrical-electronics, metallurgy, agri-food and industrial parks
IEC 61439-1:2020 covers general assembly requirements; conformity depends on applicable additional parts
IEC 61730-1:2023 specifies module construction safety requirements; installed systems require other relevant rules
IEC 62933-5-2:2025 addresses grid-integrated electrochemical storage system safety over the full lifecycle
EU Regulation 2023/1542 governs battery product, sustainability and waste requirements for relevant exports
PVGIS provides site-specific radiation and photovoltaic production estimates, not guaranteed actual yield
IEA SHC identifies solar industrial heat and its appropriate temperature ranges and industrial uses
Regional water-basin authority presents Morocco's Water Law 36-15; abstraction and drilling require applicable authorisation
Regional investment centre describes the seawater desalination plant serving Agadir and irrigated Chtouka; published capacities include planned stages, not confirmed current production
Official agricultural water agency describes conversion to localised irrigation, distribution networks, collective filtration and farm support
2024 report covers depletion risks and efficiency measures; improved application efficiency is not automatically a basin-level water saving
Moroccan irrigation-water quality and use of treated wastewater are subject to applicable conditions and authority controls
ISO 9261:2004, confirmed current in 2025, defines specifications and test methods for drip emitters and emitting pipe
ISO 9912-2:2013 covers construction and tests of strainer/disc filters but does not alone establish filtration performance under every water condition
ISO 16399:2023 covers technical/metrological requirements for irrigation water metering
ISO 4064-1:2024 specifies water-meter performance and technical requirements; local usage approval may be additional
Regional agrotechnology organisation documents water scarcity and experience with treated wastewater in parks and golf areas
City action plan documents treated-water reuse, industrial wastewater priorities and proposed stormwater measures; proposals are not awarded contracts
EU drinking-water rules include requirements for hygienic suitability of materials in contact with potable water, with 2026 milestones
Water-quality monitoring illustrates why treatment choice and tested irrigation-water quality matter; not every treated discharge is suitable for reuse
World Bank country overview gives June 2026 irrigation modernisation status and ongoing water information and reuse work
Government legislation list includes Water Law 36-15 and decrees on reuse, quality standards and effluent discharge
Regional investment-centre industrial-sector overview establishes manufacturing and industrial-services context; it does not establish firm orders
National study identifies MAD 21 billion in construction-product/material imports and substantial potential for local substitution; does not establish regional orders
Describes the Moroccan building-material ecosystem, including precast, ceramics, marble, steel and cement
Regional investment centre identifies construction materials, plastics and metal industries, industrial zones and associated activities
Government industrial-park profile in Drarga lists construction materials, metals, plastics and electronics among permitted industrial categories; no land reservation established
Independent finished-product testing and quality-system verification for relevant Moroccan standards, with surveillance; not an automatic certificate for every product
Lists product classes including hollow clay bricks, ceramic tiles, reinforcing products and electrical materials; identify the relevant current specification
Official urban agency lists earthquake, energy performance, fire and earth-building decrees; check local amended versions and project permissions
Public agency records 2024 government adoption of updated seismic zoning provisions after the 2023 earthquake; specific design still needs engineering approval
Describes Moroccan 2014 decree 2-13-874 and performance/prescriptive energy rules; project climate zone and building type determine obligations
Regulation (EU) 2024/3110 applies in stages from 2026; harmonised product standards and national installation rules govern actual market access
Official construction product FAQ explains when EN 1090-1 CE marking applies to structural metallic products; not every metal article falls under it
Describes committees for doors, windows, thermal products, clay products and sanitary fittings, indicating product families subject to local standards work
Regulation (EU) 2023/1464 limits formaldehyde emissions for wood-based articles and other product categories, with exclusions and application dates
Identifies RTCM as the national energy code and differentiates performance of roofs, glazing and other envelope elements
Official description of sorting, safety risks and recycled construction material streams, with variability in recovery performance
Published city action plan identifies stormwater, wastewater and municipal infrastructure interventions; proposals are not awarded contracts
ISO/IEC 17025:2017 defines laboratory competence, impartiality and valid test result requirements; accreditation is a separate process
Sector study reports Moroccan textile exports to the EU and pilot evidence for textile offcut recycling; figures and findings are national, not Agadir-specific
Official industrial estate listing identifies Drarga industrial park and textile/leather among compatible sectors; actual vacant plots require confirmation
EU Regulation 1007/2011 specifies fibre-composition labelling requirements and textile product scope; other category rules may also apply
Policy programme sets direction for durability, repair, reuse, extended producer responsibility and product design; specific obligations have phased timelines
Commission explains product destruction restrictions and disclosure requirements under ESPR, subject to company size and implementation schedules
DPP rollout is phased by product; textile-specific data obligations follow applicable future product rules rather than applying indiscriminately today
General protective clothing standard is to be applied with other hazard-specific performance standards, not by itself as a safety certificate
Voluntary certification tests defined textile product scopes for harmful substances; it is not a substitute for legal market conformity or environmental life-cycle analysis
Regulation (EU) 1007/2011 sets composition and labelling rules for textiles placed on the EU market
Moroccan textile processing, effluent and water stress are material risks; no site-level water authorisation inferred
EU-Morocco trade preferences depend on the actual HS heading, originating inputs, processing and evidence; assembly does not automatically confer preferential origin
CRI identifies regional industrial production and agricultural industries, which can be prospective customers of textile services; not proof of purchase orders
EU PPE placing-on-market requires risk-appropriate conformity assessment, technical evidence and correct CE marking; voluntary tests alone do not qualify
Current wide-width tensile test method for geosynthetics; complete product suitability depends on additional requirements
Manufacturer must check whether any particular textile article is a medical device under EU MDR and what obligations follow
IFC 2023–26 project describes post-industrial offcut supply chains and quality validation for recycled cotton
Reuse, repair and textile-waste stewardship policy provides context for compliant sorting and refurbishing; cross-border waste movements need separate checks
Peer-reviewed overview explains water and wastewater burdens in textile wet processing; specific efficiency depends on measured processes
Sector analysis describes export-based garment clusters, imported-input dependence, productivity issues and European sourcing relations
Defines requirements for competent testing and valid results; method-by-method accreditation scope needs independent confirmation
Official regional catalogue includes food production machinery, food machinery spares, electrical cabinets and electronic board assembly among possible projects, without implying signed customers
Official industrial estate entry identifies the site and compatible mechanical, electrical and electronics activities; available plots require verification
Regional investment body identifies food processing, mechanics, metals and electrics/electronics as existing or targeted regional industrial sectors
Official regional overview describes processing, logistics and existing industrial activity; the figures are indicative historic statistics, not current confirmed equipment orders
Machinery Directive 2006/42/EC applies until 19 January 2027; Regulation (EU) 2023/1230 applies mandatorily from 20 January 2027
EU electrical products can fall within Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU and related legislation, based on product scope
General safety-of-machinery framework for assessing hazards and reducing risks; does not itself grant CE marking
Specifies construction and verification requirements for low-voltage assemblies, together with the relevant product part of the series
Standard for machinery electrical equipment, controls, protection and technical documentation; requirements vary by machine application
Preferential origin, tariffs and cumulation are HS-product and input-specific; Moroccan assembly does not automatically grant EU duty preference
Food equipment hygienic design involves cleanability, materials and contamination prevention beyond superficial use of stainless steel
An independent laboratory must demonstrate method-specific competence and impartiality; a test report is not permission to issue EU CE certification
Motor and variable-speed-drive ecodesign rules apply to defined equipment categories placed on EU market; check exact rating and exemptions
Controls welding quality selection for metallic products; complements rather than replaces a factory quality-management system
Standard quality requirements for fusion welding of metallic materials; evidence for qualified fabrication methods
The 2018/2019 agricultural campaign was estimated to generate 55,584 tonnes of agricultural plastics; a historic waste-generation estimate, not currently contracted recyclable supply. Earlier work also assessed agricultural organics.
The 2024 technical note discusses agricultural plastics, sorting infrastructure, Souss-Massa tourism pilots and formal/informal collection networks; it does not guarantee access to municipal waste.
Legal basis for waste classification, management, reuse and recovery. Check current consolidated texts and local authorisations for each proposed operation.
Identifies plastics, paper, construction waste, end-of-life equipment and other recovery streams as national priorities; national programme ambitions are not booked local feedstock.
Practical CIBEL case of improved seafood by-product capture and collaboration between fish canning, fishmeal and oil production; site-specific pilot figures are not industry-wide estimates.
Peer-reviewed review of potential uses for argan nutshells, press cake and pulp; laboratory potential does not establish commercial demand or regulatory approval.
EU packaging regulation began applying in August 2026 with staged requirements; imported packaging needs product-specific compliance and buyer verification.
From 21 November 2026 the EU prohibits plastic waste exports to non-OECD countries, including Morocco, subject to the regulation; not a basis for European-waste feedstock plans.
Food-contact recycled plastics require suitable processes and regulation-specific controls, distinct from generic washing, flaking or re-extrusion.
Describes the harmonised EU packaging requirements relevant to reuse, recyclability and recycled-content claims for products placed on EU markets.
Regional context for collection, low recovery rates, organic waste and market structure; MENA-wide figures must not be presented as Agadir quantities.
Official listing of Moroccan waste-management laws and decrees, including hazardous-waste and cross-border waste rules.
Regional investment catalogue identifies recovery of fish-processing co-products as a possible manufacturing opportunity, not a secured supply contract.
Article 3 classification distinguishes industrial, agricultural, inert and hazardous material, with consequences for collection and treatment rights.
Official guidance for treatment, marking, repair and reuse of wooden pallets and other packaging in international trade.
The regional catalogue lists industrial opportunities for recycling aluminium, copper and brass into useful alloys and metal products; projects are proposals, not proven contracted local scrap volume.
Customs trade data shows Morocco imported approximately 1.53 million tonnes of HS 720449 ferrous scrap in 2025; national imports are not a measure of available waste in Agadir.
The operating port includes fishing, ship repair and construction services and launch/docking support for vessels up to 750 tonnes. This is a stated capacity, not a guarantee of available slots.
An established local yard describes steel construction, refit, welding, piping, insulation, painting and fishing/service-vessel work; existing activity does not prove capacity for any proposed new yard.
An Anza shipyard expansion north of Agadir is listed as programmed works with a historical indicative MAD 2.1 billion works budget; the report explicitly lists no identified demand study.
Government announcement of a new Casablanca shipyard; shows Moroccan national capability development, also potential competition for other locations.
National blue-economy summary identifies fisheries, aquaculture, shipbuilding and repair, ports, desalination, biotech and other possible marine industries.
EU policy supports competitive maritime manufacturing, specialised vessel supply chains, ship repair and maintenance; it is not an order guarantee for Moroccan manufacturers.
Moroccan aquaculture development requires planned locations and permits; 2023 law 84.21 is cited for sector rules and planning, not permission for an unspecified new farm.
The protected coastal area south of Agadir includes estuaries, dunes, cliffs and biodiversity requiring early location screening for any new industrial-port concept.
Peer-reviewed coastal research links harbour structures and altered alongshore sand transport with erosion and sediment-budget changes; new inlet modelling is essential.
Engineering case study: two harbour basins were excavated entirely landward of the high-water mark and subsequently flooded. It establishes the method, not the suitability of a south-Agadir site.
Examples of purpose-built harbour basins, channels and reclaimed industrial land, including Duqm; engineering feasibility is location-specific.
National fleet-development discussion provides strategic market context without identifying orders for specific vessels or Agadir shipyards.
Official regional statistical monograph documents Agadir coastal and artisanal fish landings of 44,850 tonnes in 2024; this does not represent total industrial seafood procurement.
Official Moroccan lists for approved fish-processing, fishmeal/oil and bivalve production establishments; regulatory scope depends on actual products and markets.
Ship-generated garbage and fishing gear have regulated handling and reception requirements; this does not replace local waste-management permits.
Sets an international framework for safe and environmentally sound ship recycling; applicable requirements and state participation must be checked for actual vessels and facilities.
EU marine equipment placed on relevant EU-flag vessels must comply with equipment-specific conformity and wheel-marking requirements where applicable.
EU electronic catch certificate system under relevant situations; catch and processing traceability obligations are separate from food-factory hygiene approval.
The national initiative discusses reconstituting merchant shipping, but without secured contracts; cited for prospective fleet-market context.
Food-of-animal-origin exports require eligible countries and listed establishments with official public-health controls; new plants do not receive automatic EU access.
Contemporary report of local vessel construction and repair workshops, and infrastructure limits at Agadir port; secondary account, verify original administrative figures before marketing.
UNCTAD identifies China as the largest shipbuilding country by gross tonnage for 2024, supporting differentiation toward specialised yards and supply chains rather than speculative large-ship competition.
April 2025 announcement of commercialisation of a 45-hectare logistics zone south of Agadir, an estimated MAD 350 million investment and intended job creation; not a current land-availability offer.
2024 official port report identifies Agadir as an established Moroccan port with commercial maritime flows; not evidence of guaranteed container sailings for a particular shipment.
Official figures for existing cargo, imports, exports and container throughput; figures are year-to-date as of October 2025, not the final annual total.
Moroccan food imports and exports are subject to Law 28-07, applicable health/sanitary rules and destination-specific certificates.
Food establishments must secure applicable sanitary approval or authorisation, with technical and administrative records.
Moroccan perishable-food transport rules include hygiene requirements and defined technical tests and certificates for insulated and refrigerated vehicles.
International rules for the carriage of specified perishable foodstuffs and compliant special transport equipment; actual applicability depends on trade lane and product.
Regulation (EU) 2024/573 sets phased restrictions and requirements for certain refrigerants and equipment placed on the EU market.
EU energy-labelling and ecodesign rules apply to defined professional refrigeration equipment categories; walk-in cold rooms have a different scope.
Proof of origin must support product-specific preference claims; forwarding and repacking do not automatically confer preferential origin.
EU–Morocco rules on preferential origin and cumulation have been updated; operators must check the actual rule and documentation for each product.
The EU is an important trade partner for Morocco; data describe country-level trade, not confirmed demand for any single Agadir logistics investment.
Standard for temperature-controlled parcel delivery including intermediate transfer; scope does not include certain direct deliveries and pharmaceutical products.
Earlier analysis describes coordination, cold-chain and shipping challenges; historical findings are useful questions, not proof of present deficiencies.
Regional corridor annex lists the Aït Melloul logistics zone as a planned infrastructure project, including its location, concept, and historic investment assumptions.
Overview of automotive and electric-mobility manufacturing developments in Morocco; national investment trends do not establish local electric-van fleet volumes in Agadir.
Machinery and industrial handling equipment supplied into the European market require relevant safety assessment and documentation under the applicable machinery framework.
The linked sources are independent publishers. Some data may be updated by the source after this website’s last review. Fees, customs legislation, incentives and technical standards must be rechecked for the contemplated project and its transaction date.